4-IN-1 CYLINDER HONE KENNEDY

4-IN-1 CYLINDER HONE KENNEDY

CODE : KEN5032930K

รายละเอียดสินค้า

4-IN-1 CYLINDER HONE KENNEDY

Cylinder Hone Set

Four different honing tools in one set suitable for honing/deglazing car brake and clutch cylinders, motorcycle, lawnmower, outboard motor engine cylinders, small bore car engine cylinders with capacities between 18 - 89mm. Self-aligning flexible shaft and leg assembly for smooth operation at all speeds and easy alignment. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied in a plastic blow-moulded case. 
Overall length: 200mm. 
Set Contents: main honing body, twin leg set - 50mm, triple leg set - 50mm, triple leg set - 60mm; three sets of medium stones: 19 x 4.5mm (x3 off), 29 x 4.5mm (x5 off) and
51 x 7.0mm (x3 off).

Twin Leg 18 - 64mm For small brake cylinders 50mm twin leg set and 2x 29mm stones. 
(NB Ready assembled in kit)
Triple Leg 19 - 68mm For large brake/clutch cylinders. Use medium collar, 50mm triple leg set and 3x 29mm stones.
Triple Leg 32 - 89mm For disc brake cylinders. Use large spring, 60mm triple leg set and 3x 19mm stones.
Triple Leg 32 - 89mm For small engine cylinders. Use large spring, 60mm triple leg set and 3x 51mm stones.

***สินค้าอาจมีการปรับขึ้นหรือลดราคา กรุณาสอบถามก่อนสั่งซื้อทุกครั้ง***