4" 2/3-JAW DOUBLE ENDED MECHANICAL PULLER

Kennedy Mechanical Bearing Pullers

Industrial Reversible/Double-Ended Adjustable
Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75, 100, 150 and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external applications. 
Selection 
Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what 'spread' is needed - this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.

All pullers can be assembled for internal or external use.

Combined 2+3 Jaw Pullers - 
'4-in-1'
Supplied with 2 and 3-legged yokes and 3 leg assemblies - allowing the pullers to be configured in 2 jaw internal / external or 3 jaw 
internal / external assemblies.

Order Code : KEN5033240K

Spread 40-87mm

Reach 100mm

Thread Length 100

ยี่ห้อ KENNEDY